FleetKleen – Industrial Strength Bio-Remedial • Enzymatic Cleaner & Degreaser

PRODUCT OVERVIEW
FleetKleen™ is a new concept in the cleaning and degreasing of driveways, concrete floors, metal grating, cement and most solid surfaces. This product utilizes Bio-Remedial technology to literally “eat” grease, oil, and hydrocarbons off any hard surface.  This process uses naturally occurring, harmless micro-organisms with specially formulated bio-surfactants to degrade these hydrocarbons. FleetKleen™ contains no solvents and is non-flammable. It is non-toxic, non-hazardous, non-corrosive and non-caustic. When this product is used in a routine maintenance program, it will effectively help to maintain a clean and safe environment while effectively and economically eliminating hazardous hydrocarbon pollution in the work place.

HOW TO USE THIS PRODUCT
FleetKleen™ is a highly concentrated liquid. Whichever procedure you decide to follow, you must mix this product at a minimum ratio of 15 parts water to 1 part FleetKleen™ in order for this product to work effectively. You may add more water, if necessary, for economy or as your application may dictate.

PRESSURE WASHER PROCEDURE:

1. Insert the mixing tube of the pressure washer directly into the spout of the container.
2. This product must be mixed at a minimum of 15 parts water to 1 part FleetKleen™.
3. Adjust concentration levels as appropriate.
4. Apply the mixture directly on the area you wish to clean and degrease.
5. Use the “pressure” to aerate and agitate the “stubborn” areas.
6. Allow the area to remain wet for as long as possible.
7. Very old stains may need several applications.

MANUAL SPRAYER & BRUSH PROCEDURE:

1. Pre-mix FleetKleen™ in an industrial sprayer at an appropriate concentration level.
2. This product must be mixed at a minimum of 15 parts water to 1 part FleetKleen™.
3. Spray the stained area with the mixture, Be sure to cover the area to be cleaned.
4. Wait a few minutes before going to next step.
5. Agitate and aerate the area with a stiff brush or broom.
6. Allow the area to remain wet for as long as possible.
7. Very old stains may need several applications.

WHERE TO USE THIS PRODUCT
While FleetKleen™ can be used in all phases of manufacturing, commercial and industrial operations, the following is a partial list of the many uses of this product. Please contact ProfitMax Chemical or EnviroLogic if you have any questions about its usage:

• Driveways
• Loading Docks
• Manufacturing Floors
• Fueling areas
• Lubrication Areas
• Machine Shops
• Garages
• Warehouses
• Hydraulic Line Breaks
• Lubricant Pipeline Breaks
• Equipment Failures
• Tool Shops
• Elevator Pits
• Oil Storage Areas
• Chemical Storage Area
• Auto & Truck Wash Areas
• Blow Pits
• Maintenance Areas
• General House-Keeping
• Vehicle Parking Area
• Pumping Stations
• Concrete Walls
• Brick & Gravel Areas
• Vehicle Maintenance Areas

TECHNICAL INFORMATION
FleetKleen™ is an active mixture of hydrocarbon-oxidizing, naturally occurring, single-celled micro-organisms with a “bio-surface cleaning agent” & water.

It is specially formulated to be safe, environmentally enhancing & effective.

PRODUCT EFFECTIVENESS: The effectiveness of this product and the “speed” at which it works is determined by certain factors. In general these factors are as follows:
TEMPERATURE: The warmer the temperature, the faster this product will work.
AGE OF THE STAIN OR SPILL: The older the stain or spill, the longer it takes to work.
AERATION & PRESSURE: The use of an industrial sprayer or pressure washer speeds the process.
TYPE OF HYDROCARBON: Some hydrocarbons take longer than others.

It has been our [EnviroLogic] experience that the “cleaning” action of this product begins immediately. The bio-remedial process can begin almost immediately but may take longer depending on the above factors.

PHYSICAL PROPERTIES:
Appearance:                 Orange Liquid
Odor:                                Orange Citrus
Boiling Point:                212° F.
Soluble in Water:         Complete
pH Concentrate:          6.9 to 7.2
pH Diluted:                    6.9 to 7.5
Evaporation Rate:      Same as Water

PACKAGING INFORMATION
5 GALLON “CUBITAINERS”

2-1/2 GALLON “F STYLE JUGS” (2 per Case)

1 GALLON “F-STYLE JUGS” (4 per Case)

16 OUNCE BOTTLES (12 per Case)

55 GALLON DRUMS

BULK PACKAGING AVAILABLE

For more information on ProfitMax Chemical and the products as well as wholesale/distributor pricing, contact Mark Harrison at 866.750.5863 or by e-mail.

FleetKleen – Industrial Strength Bio-Remedial • Enzymatic Cleaner & Degreaser is a post from: EnviroMarketing

Liquid Remediact  – Microbial Hydrocarbon Remediation Formula

PRODUCT OVERVIEW
Liquid Remediact™ is a newly developed product that was created to solve soil & water hydrocarbon contamination problems. This product has the ability to bioremediate most hydrocarbons with a minimum amount of equipment, labor and cost.  What sets Liquid Remediact™ apart from all other products is the high concentration of live synergistic bacteria, in a remediation liquid, that quickly starts the bio-remediation process. Because of its relatively low cost, Liquid Remediact™ is the ideal solution for most industries to solve their own hydrocarbon contamination problems.

HOW TO USE THIS PRODUCT
Liquid Remediact™ is highly concentrated. This product must be mixed in a ratio of 10 parts water to 1 part Liquid Remediact™. Changing this dilution is not recommended. Each mixed or diluted gallon will remediate approximately one cubic yard of soil or 200 gallons of water. Liquid Remediact™ is an exceptionally universal product and can be applied to in-situ and ex-situ contamination projects by any of the following methods:

• Land Farming
• Pressure Spraying
• “Geoprobe” Injection
• Monitoring Well Injection
• Gravity Feed System
• Automatic Dosing Equipment

Liquid Remediact™ can be used in conjunction with Dry Remediact and HC Series products as your specific circumstances require. Liquid Remediact Kit™ includes Nutrients and “BioEnhancers” to accelerate your task.  Consult your Distributor or Factory Representative for details.

THIS PRODUCT WILL TREAT
The following is a partial list of the hydrocarbons that Liquid Remediact™ can remediate.  Please contact ProfitMax Chemical or SpillAway Brands™, if you have any questions about its usage:

• DIESEL FUEL
• MINERAL SPIRITS
• MOTOR OIL
• AROMATICS
• ETHYLBENZENE
• JET FUEL
• CUTTING OILS
• GLYCOLS
• HEATING OIL
• GASOLINE
• BENZENE
• PARAFFIN
• LUBRICATING OIL
• PAINT THINNERS
• ALCOHOL
• NAPHTHALENE
• CRUDE OIL
• TOLUENE
• KEROSENE
• SOLVENTS
• ANTI-FREEZE
• ORGANIC PESTICIDES
• ORGANIC HERBICIDES
• TRANSMISSION FLUID
• XYLENE
• ORGANIC SOLVENTS
• GREASE
• TARS

TECHNICAL INFORMATION
Liquid Remediact™ is an active mixture of hydrocarbon-oxidizing, naturally occurring, single-celled micro-organisms with a “bio-surface cleaning agent” and water.

It is specially formulated to be safe, environmentally enhancing and effective.

PRODUCT EFFECTIVENESS: The effectiveness of this product and the “speed” at which it works is determined by certain factors. In general these factors are as follows:
TEMPERATURE: The warmer the temperature, the faster this product will work.
The effective operating temperature is between 42° F. & 120° F.
AERATION & PRESSURE: Aeration (air hose or “bubbler) & pressure speeds the process.
TYPE OF HYDROCARBON: Some hydrocarbons take longer than others.
The bio-remedial process generally will begin immediately but may take longer to complete depending on the above factors.

PHYSICAL PROPERTIES:
Appearance:                Clear Liquid
Odor:                        Orange Citrus
Boiling Point:               212° F.
Soluble in Water:        Complete
pH Concentrate:         6.9 to 7.2
pH Diluted:                6.9 to 7.5
Evaporation Rate:      Same as Water

PACKAGING INFORMATION
5 GALLON “CUBITAINERS”

1 GALLON “F-STYLE JUGS” (4 per Case)

55 GALLON DRUMS

TOTES AVAILABLE

For more information on ProfitMax Chemical and the products as well as wholesale/distributor pricing, contact Mark Harrison at 866.750.5863 or by e-mail.

Liquid Remediact – Microbial Hydrocarbon Remediation Formula is a post from: EnviroMarketing

SpillAWay+ Absorbent

PRODUCT OVERVIEW
SpillAway+ Absorbent introduces a new era in the absorption & disposal of hydrocarbon contaminants in the work place. This product merges the technologies of a pharmaceutical grade, highly efficient absorbent with safe & effective microbes utilizing the exciting technique of Bio-Remediation.  When used as directed, SpillAway+ Absorbent can eliminate the need for costly, special and highly inefficient disposal of all hydrocarbons on solid surfaces. The high absorbency of this product makes it the ideal product to absorb oil, diesel fuel, gasoline, kerosene, etc. and then literally “eat” the contamination with its bio-remedial properties. It will completely absorb on contact and will not leach. The surface will be completely dry, free of the contaminant, and skid resistant. As an added benefit there is a significant reduction of hydrocarbon odor. Because of the pharmaceutical grade of this absorbent & the completely harmless microbes that are used, SpillAway+ Bio-Remedial Absorbent can be used in most commercial & industrial environments including food processing & packaging areas.

HOW TO USE THIS PRODUCT
SpillAway+ Bio-Remedial Absorbent ™ can be used to absorb & bio-remediate all petroleum hydrocarbons. Use the following instructions as a general guideline for this product.

1. If for use on a fresh spill, use just enough SpillAway+ Absorbent on the spill perimeter to create a barrier around the spill.

2. Apply SpilIAway+ Bio-Remedial Absorbent ™ liberally to the spill itself so it covers the spill surface in an excess amount.

3. When the oil has been absorbed by the powder (it turns dark gray) you have two options:

• You can prevent the spill from staining the surface by spraying the SpillAway+ Bio-Remedial Absorbent ™ with water, agitating the material with a brush or broom and leave the material in place overnight or…

• Gather or sweep up the powder and place it in a spare bucket and reuse at a later time. SpillAway+ Bio-Remedial Absorbent ™ may be reused until it will no longer absorb. Once the material is saturated, place it in a bucket or drum with water. Agitate it and let the microbes do their work. After they’ve eaten the oil (usually most of it is gone in 48 hours), you can dispose of the material in the trash or throw it on the lawn; it will act like mulch.

4. SpillAway+ Bio-Remedial Absorbent ™ will leave the surface free from contamination, skid resistant and safe to work or walk on.

WHERE TO USE THIS PRODUCT
While SpillAway+ Bio-Remedial Absorbent ™ can be used in all phases of manufacturing, commercial and industrial operations, the following is a partial list of the many uses of this product.  Please contact ProfitMax Chemical or SpillAway Brands if you have any questions about its usage:

• Driveways
• Loading Docks
• Manufacturing Floors
• Fueling areas
• Lubrication Areas
• Machine Shops
• Garages
• Warehouses
• Hydraulic Line Breaks
• Lubricant Pipeline Breaks
• Equipment Failures
• Tool Shops
• Elevator Pits
• Oil Storage Areas
• Chemical Storage Area
• Auto & Truck Wash Areas
• Blow Pits
• Maintenance Areas
• General House-Keeping
• Vehicle Parking Area
• Pumping Stations
• Concrete Walls
• Brick & Gravel Areas
• Vehicle Maintenance Areas

TECHNICAL INFORMATION
SpillAway+ Bio-Remedial Absorbent ™ is an active mixture of hydrocarbon-oxidizing, naturally occurring, single-celled micro-organisms with a pharmaceutical grade absorbent.

It is specially formulated to be safe, environmentally enhancing and effective.

PRODUCT EFFECTIVENESS: The effectiveness of this product and the “speed” at which it works is determined by certain factors. In general these factors are as follows:
TEMPERATURE: The warmer the temperature, the faster this product will work.
AGE OF THE STAIN OR SPILL: The older the stain or spill, the longer it takes to work.
TYPE OF HYDROCARBON: Some hydrocarbons take longer than others.

It has been our experience that the absorption action of this product begins immediately.  The bio-remedial process will begin almost immediately, after the introduction of water, but may take a longer period of time to complete depending on the above factors.

PHYSICAL PROPERTIES:
Appearance:                         Grey Powder
Odor:                                      Odorless
Boiling Point:                        N/A
Soluble in Water:                Insoluble
pH Powder:                           7.2
pH With Water                     6.9 to 7.5
Evaporation Rate:              N/A

PACKAGING INFORMATION
25 Lb. Plastic Pails

10 Lb. Plastic Jugs (4 per Case)

BULK PACKAGING AVAILABLE

For more information on ProfitMax Chemical and the products as well as wholesale/distributor pricing, contact Mark Harrison at 866.750.5863 or by e-mail.

SpillAWay+ is a post from: EnviroMarketing

Liquid Soil

Liquid Soil Info is a post from: EnviroMarketing

OFM-500™ Bio-Remedial Treatment For Oil Field Maintenance

PRODUCT OVERVIEW
This product was developed to meet the demanding needs of the “oil-drilling” industry. It has been specially formulated to treat & clean crude oil and its by-products on hard surfaces, soils, gravel, pits, machinery & oil rigs. The highly effective cleaners & degreasers developed for this product effectively break-down all known components of the crude oil. Further, the bio-remedial “action” of the harmless micro-organisms, turn the harmful components into safe, environmentally friendly substances that can be absorbed into the soil or discharged into drainage systems. This product contains no solvents & is non-flammable. It is non-hazardous, non-corrosive & non-caustic. It is manufactured under strict quality control standards making it one of the safest cleaning products on the market for both you and the environment.

We recommend that OFM-500™ be used as a major part of a routine maintenance program in all phases of the drilling process.

HOW TO USE
Dilute 1 part OFM-500™ to 15 to 30 parts water depending on the intensity of the application. For example, 1 gallon of OFM-500™ makes 15 to 30 gallons of diluted product that is ready for use. A water temperature between 80° F. & 90° F. is the optimum temperature for use with this product but, it will perform very well in any water temperature between 40° F. & 120° F. Apply this product using a pressure or industrial pump sprayer or manually from a drum or pail. When spraying use sufficient pressure to break the surface tension. If pressure is not used, manually agitate & aerate OFM-500™ on the surface being treated. In other words, use a stiff broom or brush on rocks, soil, gravel, grass & trees if it is inconvenient to use a sprayer. Remember that you must mix this product, as described above, in order for both the cleaning effect & the bio-remedial process to take place.

Do not exceed a water temperature of 125°F.

WHERE TO USE THIS PRODUCT
While OFM-500™ can be used in all phases of oil field production operations, the following is a partial list of the many uses of this product. Please contact ProfitMax Chemical or SpillAway Brands, if you have any questions about its usage:

• Production Fluid Overflows
• Surface Pit Closures
• Lubrication Leaks
• Workover Surface Spills
• Pigging Discharges
• Equipment Failures
• Flowline Breaks
• Farming Sites
• Stuffing Box Leaks
• General House-Keeping
• Pumping Stations
• Pumping Unit Oil Change Spills
• Tank Battery Buildup
• Hydraulic Line Breaks
• Compressor Stations
• Pit Overflows
• Pipeline Breaks
• Machine Shops
• Land Sites
• Wellhead Area
• Maintenance Areas
• Vehicle Parking Area
• Pumping Unit Gear End Leaks
• Vehicle Maintenance Areas

TECHNICAL INFORMATION
OFM-500™ is an active mixture of hydrocarbon-oxidizing, naturally occurring, single-celled micro-organisms with a “bio-surface cleaning agent” and water.

It is specially formulated to be safe, environmentally enhancing and effective.

PRODUCT EFFECTIVENESS: The effectiveness of this product and the “speed” at which it works is determined by certain factors. In general these factors are as follows:
TEMPERATURE: The warmer the temperature, the faster this product will work.
AGE OF THE STAIN OR SPILL: The older the stain or spill, the longer it takes to work.
AERATION & PRESSURE: The use of an industrial sprayer or pressure washer speeds the process.
TYPE OF HYDROCARBON: Some hydrocarbons take longer than others.
It has been our experience that the “cleaning” action of this product begins immediately. The bio-remedial process can begin almost immediately but may take longer depending on the above factors.

PHYSICAL PROPERTIES:
Appearance:                      Brown Liquid
Odor: Orange                     Citrus
Boiling Point:                      212° F.
Soluble in Water:                Complete
pH Concentrate:                 6.9 to 7.2
pH Diluted:                        6.9 to 7.5
Evaporation Rate:              Same as Water

PACKAGING
5 GALLON “CUBITAINERS”

2-1/2 GALLON “F STYLE JUGS” (2 per Case)

1 GALLON “F-STYLE JUGS” (4 per Case)

55 GALLON DRUMS

BULK PACKAGING AVAILABLE

For more information on ProfitMax Chemical and the products as well as wholesale/distributor pricing, contact Mark Harrison at 866.750.5863 or by e-mail.

Oilfield Maintenance is a post from: EnviroMarketing

Liquid Soil Application Rates

Liquid Soil Application Rates is a post from: EnviroMarketing