FleetKleen – Industrial Strength Bio-Remedial • Enzymatic Cleaner & Degreaser
PRODUCT OVERVIEW
FleetKleen™ is a new concept in the cleaning and degreasing of driveways, concrete floors, metal grating, cement and most solid surfaces. This product utilizes Bio-Remedial technology to literally “eat” grease, oil, and hydrocarbons off any hard surface. This process uses naturally occurring, harmless micro-organisms with specially formulated bio-surfactants to degrade these hydrocarbons. FleetKleen™ contains no solvents and is non-flammable. It is non-toxic, non-hazardous, non-corrosive and non-caustic. When this product is used in a routine maintenance program, it will effectively help to maintain a clean and safe environment while effectively and economically eliminating hazardous hydrocarbon pollution in the work place.
HOW TO USE THIS PRODUCT
FleetKleen™ is a highly concentrated liquid. Whichever procedure you decide to follow, you must mix this product at a minimum ratio of 15 parts water to 1 part FleetKleen™ in order for this product to work effectively. You may add more water, if necessary, for economy or as your application may dictate.
PRESSURE WASHER PROCEDURE:
- Insert the mixing tube of the pressure washer directly into the spout of the container.
- This product must be mixed at a minimum of 15 parts water to 1 part FleetKleen™.
- Adjust concentration levels as appropriate.
- Apply the mixture directly on the area you wish to clean and degrease.
- Use the “pressure” to aerate and agitate the “stubborn” areas.
- Allow the area to remain wet for as long as possible.
- Very old stains may need several applications.
MANUAL SPRAYER & BRUSH PROCEDURE:
- Pre-mix FleetKleen™ in an industrial sprayer at an appropriate concentration level.
- This product must be mixed at a minimum of 15 parts water to 1 part FleetKleen™.
- Spray the stained area with the mixture, Be sure to cover the area to be cleaned.
- Wait a few minutes before going to next step.
- Agitate and aerate the area with a stiff brush or broom.
- Allow the area to remain wet for as long as possible.
- Very old stains may need several applications.
WHERE TO USE THIS PRODUCT
While FleetKleen™ can be used in all phases of manufacturing, commercial and industrial operations, the following is a partial list of the many uses of this product. Please contact ProfitMax Chemical or EnviroLogic if you have any questions about its usage:
- Driveways
- Loading Docks
- Manufacturing Floors
- Fueling areas
- Lubrication Areas
- Machine Shops
- Garages
- Warehouses
- Hydraulic Line Breaks
- Lubricant Pipeline Breaks
- Equipment Failures
- Tool Shops
- Elevator Pits
- Oil Storage Areas
- Chemical Storage Area
- Auto & Truck Wash Areas
- Blow Pits
- Maintenance Areas
- General House-Keeping
- Vehicle Parking Area
- Pumping Stations
- Concrete Walls
- Brick & Gravel Areas
- Vehicle Maintenance Areas
TECHNICAL INFORMATION
FleetKleen™ is an active mixture of hydrocarbon-oxidizing, naturally occurring, single-celled micro-organisms with a “bio-surface cleaning agent” & water.
It is specially formulated to be safe, environmentally enhancing & effective.
PRODUCT EFFECTIVENESS: The effectiveness of this product and the “speed” at which it works is determined by certain factors. In general these factors are as follows:
TEMPERATURE: The warmer the temperature, the faster this product will work.
AGE OF THE STAIN OR SPILL: The older the stain or spill, the longer it takes to work.
AERATION & PRESSURE: The use of an industrial sprayer or pressure washer speeds the process.
TYPE OF HYDROCARBON: Some hydrocarbons take longer than others.
It has been our [EnviroLogic] experience that the “cleaning” action of this product begins immediately. The bio-remedial process can begin almost immediately but may take longer depending on the above factors.
PHYSICAL PROPERTIES:
Appearance: Orange Liquid
Odor: Orange Citrus
Boiling Point: 212° F.
Soluble in Water: Complete
pH Concentrate: 6.9 to 7.2
pH Diluted: 6.9 to 7.5
Evaporation Rate: Same as Water
PACKAGING INFORMATION
5 GALLON “CUBITAINERS”
2-1/2 GALLON “F STYLE JUGS” (2 per Case)
1 GALLON “F-STYLE JUGS” (4 per Case)
16 OUNCE BOTTLES (12 per Case)
55 GALLON DRUMS
BULK PACKAGING AVAILABLE
For more information on ProfitMax Chemical and the products as well as wholesale/distributor pricing, contact Mark Harrison at 866.750.5863 or by e-mail.
